4. Remove the 3rd gear needle bearing. Inspect the 3rd gear needle bearing for wear or damage. Install a new needle bearing as necessary.
5. NOTE: Prior to removing the synchronizer rings, note the position of each synchronizer ring.
Remove the 3rd gear synchronizer ring assembly.
Inspect all synchronizer ring components for wear or damage. Install new components as necessary.
6. Remove the 3rd/4th gear synchronizer assembly snap ring.
Source reference 3100
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.