No | GO to L3 |
|---|
L3 CHECK THE EVAPORATOR TEMPERATURE SENSOR INPUT CIRCUIT FOR A SHORT TO GROUND
Connect FCIM C2402A. Ignition OFF. Disconnect FCIM C2402A. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2402A-19 | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to L4 | |
|---|---|---|
No | REPAIR the circuit. | |
L4 CHECK THE EVAPORATOR TEMPERATURE SENSOR INPUT CIRCUIT FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2402A-19 | C296-1 |
Is the resistance less than 3 ohms?
Yes | GO to L5 | |
|---|---|---|
No | REPAIR the circuit. | |
L5 CHECK THE EVAPORATOR TEMPERATURE SENSOR SIGNAL AND SIGNAL RETURN CIRCUITS FOR A SHORT TOGETHER
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C296-1 | C296-2 |
Is the resistance greater than 10,000 ohms?
Yes | GO to L6 | |
|---|---|---|
No | REPAIR the circuit. | |
Source reference 3572
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.