Yes | GO to A26 | |
|---|---|---|
No | REPAIR the circuit. | |
A21 CHECK THE STOPLAMP OPERATION
Apply the brake pedal and the stoplamps.
Do all the stoplamps illuminate?
Yes | GO to A22 | |
|---|---|---|
No | REFER to: Stoplamps (417-01 Exterior Lighting, Diagnosis and Testing). | |
A22 CHECK FOR VOLTAGE TO THE INOPERATIVE REAR PARKING LAMP
Place the headlamp switch in the OFF position. Ignition OFF. Disconnect: Except China, Inoperative LH Rear Lamp C498 or RH Rear Lamp C499. Disconnect: China Only, Inoperative LH Rear Lamp C412 or RH Rear Lamp C415. Ignition ON. Place the headlamp switch in the PARKING LAMPS position. Except China, measure:
Click to display connectors
LH Rear Lamp (Except China)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C498-2 | Ground |
Click to display connectors
RH Rear Lamp (Except China)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C499-2 | Ground |
China only, measure:
Click to display connectors
LH Rear Lamp (China Only)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C412-2 | Ground |
Click to display connectors
RH Rear Lamp (China Only)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.