Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C415-2 | Ground |
Is the voltage greater than 11 volts?
Yes | INSTALL a new rear lamp assembly. REFER to: Rear Lamp Assembly (417-01 Exterior Lighting, Removal and Installation). |
|---|---|
No | GO to A24 |
A24 CHECK THE INOPERATIVE PARKING LAMP SUPPLY CIRCUIT FOR AN OPEN
Place the headlamp switch in the OFF position. Ignition OFF. Disconnect: BCM C2280E. Except China, measure:
Click to display connectors
LH Rear Lamp (Except China)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C498-2 | C2280E-25 |
Click to display connectors
RH Rear Lamp (Except China)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C499-2 | C2280E-51 |
China only, measure:
Click to display connectors
LH Rear Lamp (China Only)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C412-2 | C2280E-25 |
Click to display connectors
RH Rear Lamp (China Only)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C415-2 | C2280E-51 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.