Yes | GO to D5 |
|---|---|
No | REPAIR the circuit in question. |
D5 CHECK FOR CORRECT RCM (RESTRAINTS CONTROL MODULE) OPERATION
Ignition OFF. Disconnect and inspect all the RCM connectors and related in-line connectors. Repair:
corrosion (install new connector or terminals - clean module pins) damaged or bent pins - install new terminals/pins pushed-out pins - install new pins as necessary
Reconnect the RCM connector and related in-line connectorss. Make sure they seat and latch correctly. Repower the Supplemental Restraint System (SRS). REFER to: Supplemental Restraint System (SRS) Repowering (501-20B Supplemental Restraint System, General Procedures). Operate the system and determine if the concern is still present.
Is the concern still present?
Yes | CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If a TSB exists for this concern, DISCONTINUE this test and FOLLOW TSB instructions. If no Technical Service Bulletins (TSBs) address this concern, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
|---|---|
No | The system is operating correctly at this time. The concern may have been caused by module connections. ADDRESS the root cause of any connector or pin issues. |
The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
Refer to Wiring Diagrams Cell 14 for schematic and connector information.
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The OCSM communicates with the diagnostic scan tool through the HS-CAN2.
Possible Sources
Fuse Wiring, terminals and connector OCSM
Visual Inspection and Diagnostic Pre-checks
Verify BCM fuse 22 (5A) is OK.
PINPOINT TEST E : THE OCCUPANT CLASSIFICATION SYSTEM MODULE (OCSM) DOES NOT
RESPOND TO THE DIAGNOSTIC SCAN TOOL
E1 CHECK THE OCSM (OCCUPANT CLASSIFICATION SYSTEM MODULE) VOLTAGE SUPPLY CIRCUIT FOR AN OPEN
Ignition OFF. Wait one minute. Disconnect: OCSM C3043
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.