MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Electronic Feature Group

Cruise Control

419-03B Cruise Control - Vehicles With Adaptive Cruise Control

2016 MustangAdaptive Cruise ControlReference 6,099 / 6,619HTML edition
← Chapter contentsProcedure contents

DTC

Description

Fault Trigger Conditions

C1A67:97 Forward Looking Sensor:

Component Or System Operation Obstructed Or Blocked

Set by the CCM as a continuous memory and on-demand DTC if the CCM detects an obstruction or if the sensor is blocked. This DTC may also set when the CCM does not see a vehicle or object on the road for an extended period.

Possible Sources

Front bumper cover Blockage or obstruction CCM mounting bracket CCM alignment CCM

PINPOINT TEST I : THE ADAPTIVE CRUISE CONTROL DOES NOT FUNCTION IN RAIN OR SNOW

CONDITIONS

I1 INSPECT THE FRONT BUMPER COVER FOR DAMAGE

With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Inspect for damage on the front and back of the front bumper cover.

Is the front bumper cover damaged?

Yes

REPAIR or INSTALL a new front bumper cover as necessary. If installing a new front bumper cover, REFER to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).

No

GO to I2

I2 INSPECT THE CCM (CRUISE CONTROL MODULE) AND FRONT BUMPER COVER FOR DEBRIS, MOISTURE, SNOW OR ICE

Inspect for debris, moisture, snow or ice on the front and back of the front bumper cover and sensor.

Is the CCM obstructed or blocked?

Yes

CLEAN the front bumper cover and radar sensor portion as necessary.

No

GO to I3

I3 INSPECT THE CCM (CRUISE CONTROL MODULE) BRACKET FOR CORRECT MOUNTING

Inspect the CCM bracket for a loose connection or damage at the connection points.

Is the CCM bracket loose, bent or damaged?

Yes

Correctly INSTALL the bracket or INSTALL new grommets as necessary. ALIGN the sensor. REFER to: Cruise Control Radar Alignment (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, General Procedures).

No

GO to I4

I4 INSPECT THE CCM (CRUISE CONTROL MODULE) FOR EXTREME VERTICAL MISALIGNMENT

Source reference 6099

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.