PINPOINT TEST H : C1A67:96
H1 CHECK THE DIAGNOSTIC TROUBLE CODES (DTCS) FROM BOTH THE CONTINUOUS AND ON-DEMAND CCM (CRUISE CONTROL MODULE) SELF-TESTS
Is DTC C1A67:96 recorded?
Yes | GO to H2 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to an intermittent fault condition. CHECK the CCM connector and the HS-CAN2 bus wire for corrosion. |
H2 CHECK FOR CORRECT CCM (CRUISE CONTROL MODULE) OPERATION
Ignition OFF. Disconnect and inspect the CCM connector. Repair:
corrosion (install new connector or terminals - clean module pins) damaged or bent pins - install new terminals/pins pushed-out pins - install new pins as necessary
Reconnect the CCM connector. Make sure it seats and latches correctly. Operate the system and determine if the concern is still present.
Is the concern still present?
Yes | CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If a TSB exists for this concern, DISCONTINUE this test and FOLLOW TSB instructions. If no Technical Service Bulletins (TSBs) address this concern, INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
|---|---|
No | The system is operating correctly at this time. The concern may have been caused by module connections. ADDRESS the root cause of any connector or pin issues. |
The Adaptive Cruise Control Does Not Function In Rain Or Snow Conditions
Refer to Wiring Diagrams Cell 31 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.