PINPOINT TEST G : B142E:78 OR B1433:54
G1 INSPECT THE CCM (CRUISE CONTROL MODULE) BRACKET
Is the CCM bracket damaged?
Yes | REPAIR or INSTALL a new CCM bracket as necessary. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
|---|---|
No | GO to G2 |
G2 PERFORM THE VERTICAL AND HORIZONTAL ALIGNMENT
NOTE: Remove the front bumper cover to carry-out the vertical alignment procedure.
Perform the alignment procedures for the CCM. REFER to: Cruise Control Radar Alignment (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, General Procedures).
Does the CCM align correctly?
Yes | The system is operating correctly at this time. The concern was caused by a misaligned sensor. |
|---|---|
No | INSTALL a new CCM. REFER to: Cruise Control Module (CCM) (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Removal and Installation). |
C1A67:96
Refer to Wiring Diagrams Cell 31 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Cruise Control - System Operation and Component Description (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Description and Operation).
DTC Fault Trigger Conditions
DTC | Description | Fault Trigger Conditions |
|---|---|---|
C1A67:96 Forward Looking Sensor: Component Internal Failure | Sets when the CCM detects an internal failure or invalid radar data with the radar sensor. |
Possible Sources
CCM
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.