DTC | Description | Fault Trigger Conditions |
|---|---|---|
U0104:00 Lost Communication With Cruise Control Module: No Sub Type Information | Sets in the HUD module if data messages received from the CCM over the HS-CAN2 are missing. |
Possible Sources
CCM HUD module
PINPOINT TEST C : U0104:00
C1 VERIFY THE CUSTOMER CONCERN
Ignition ON. Verify there is an observable symptom present.
Is an observable symptom present?
Yes | GO to C2 |
|---|---|
No | The system is operating normally at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
C2 CHECK THE COMMUNICATION NETWORK
Ignition ON. Using a diagnostic scan tool, perform the network test.
Does the CCM pass the network test?
Yes | GO to C3 |
|---|---|
No | REFER to: Communications Network (418-00 Module Communications Network) . |
C3 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE CCM (CRUISE CONTROL MODULE) SELF-TEST
Using a diagnostic scan tool, perform a CCM self-test.
Is DTC C1132:4B recorded?
Yes | If DTC C1132:4B is recorded, GO to Pinpoint Test E For any other Diagnostic Trouble Codes (DTCs), REFER to: Cruise Control (419-03B Cruise Control - Vehicles With: Adaptive Cruise Control, Diagnosis and Testing). |
|---|---|
No | GO to C4 |
C4 RETRIEVE THE RECORDED DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE HUD (HEAD UP DISPLAY) MODULE SELF-TEST
Using a diagnostic scan tool, perform a HUD module self-test.
Is DTC U3003:16 or U3003:1C recorded?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.