9. Configure the customer preference programmable parameters. Refer to: Module Configuration - System Operation and Component Description (418-01 Module Configuration, Description and Operation).
10. Train the tire pressure sensors. Refer to: Tire Pressure Monitoring System (TPMS) Sensor Location Calibration (204-04B Tire Pressure Monitoring System (TPMS), General Procedures).
11. Carry out the BCM self-test (must include an on-demand self-test) and then repeat the self-test to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.
12. Using a diagnostic scan tool, complete the PMI process for the PAM following the on-screen instructions.
Copyright © 2016 Ford Motor Company
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.