MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Rear View Mirrors

501-09 Rear View Mirrors

2016 MustangReference 929 / 6,619HTML edition
← Chapter contentsProcedure contents

Select the RH mirror with the exterior mirror selection switch. While pressing the exterior mirror control switch in the left and down directions, monitor the test light.

Does the test light illuminate only when the exterior mirror control switch is pressed in the left and down directions?

Yes

GO to D25

No

If the test light is illuminated when the exterior mirror control switch is not pressed in any direction, GO to D6 If the test light does not illuminate when the exterior mirror control switch is pressed in the left and down directions, GO to D7

D6 CHECK THE COMMON CIRCUIT FOR A SHORT TO VOLTAGE AT THE RH (RIGHT-HAND) EXTERIOR MIRROR

Ignition OFF. Disconnect: PDM C652B. Ignition ON. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C626-2

Ground

Is any voltage present?

Yes

REPAIR the circuit.

No

GO to D24

D7 CHECK THE COMMON CIRCUIT FOR AN OPEN BETWEEN THE RH (RIGHT-HAND) EXTERIOR MIRROR AND THE PDM (PASSENGER DOOR MODULE)

Ignition OFF. Disconnect: PDM C652B. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C626-2

C652B-17

Is the resistance less than 3 ohms?

Yes

GO to D8

No

REPAIR the circuit.

D8 CHECK THE COMMON CIRCUIT FOR A SHORT TO GROUND AT THE RH (RIGHT-HAND) EXTERIOR MIRROR

Source reference 929

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.