Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-2 | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to D24 |
|---|---|
No | REPAIR the circuit. |
D9 CHECK THE MIRROR MOTOR FEEDBACK CIRCUITS FOR A SHORT TO VOLTAGE AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Ignition OFF. Disconnect: RH Exterior Mirror C626. Disconnect: PDM C652B. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-8 | Ground | |
C626-9 | Ground | |
C626-10 | Ground | |
C626-12 | Ground |
Is any voltage present?
Yes | REPAIR the affected circuit. |
|---|---|
No | GO to D10 |
D10 CHECK THE MIRROR MOTOR FEEDBACK CIRCUITS FOR A SHORT TO GROUND AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Ignition OFF. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-8 | Ground | |
C626-9 | Ground | |
C626-10 | Ground |
Are the resistances greater than 10,000 ohms?
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.