Yes | GO to D11 |
|---|---|
No | REPAIR the affected circuit. |
D11 CHECK THE MIRROR MOTOR FEEDBACK CIRCUITS FOR AN OPEN BETWEEN THE RH (RIGHT-HAND) EXTERIOR MIRROR AND THE PDM (PASSENGER DOOR MODULE)
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-8 | C652B-16 | |
C626-9 | C652B-5 | |
C626-10 | C652B-6 | |
C626-12 | C652B-15 |
Are the resistances less than 3 ohms?
Yes | GO to D12 |
|---|---|
No | REPAIR the affected circuit. |
D12 CHECK THE MIRROR MOTOR FEEDBACK REFERENCE VOLTAGE AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Connect: PDM C652B. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-9 | C626-12 |
Is the voltage approximately 5 volts?
Yes | GO to D13 |
|---|---|
No | GO to D24 |
D13 CHECK THE PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS) WITH THE RH (RIGHT-HAND) EXTERIOR MIRROR DISCONNECTED
Using a diagnostic scan tool, clear the PDM Diagnostic Trouble Codes (DTCs). Perform the PDM self-test.
Is DTC B1C15:15 or B1C16:15 present?
Yes | GO to D14 |
|---|---|
No | GO to D24 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.