Does the test light illuminate only when the exterior mirror control switch is pressed in the right direction?
Yes | GO to D25 |
|---|---|
No | If the test light is illuminated when the exterior mirror control switch is not pressed in any direction, GO to D17 If the test light does not illuminate when the exterior mirror control switch is pressed in the right direction, GO to D18 |
D17 CHECK THE HORIZONTAL MIRROR CIRCUIT FOR A SHORT TO VOLTAGE AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Ignition OFF. Disconnect: PDM C652B. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-10 | Ground |
Is any voltage present?
Yes | REPAIR the circuit. |
|---|---|
No | GO to D24 |
D18 CHECK THE HORIZONTAL MOTOR CIRCUIT FOR A SHORT TO GROUND AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Ignition OFF. Disconnect: PDM C652B. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C626-10 | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to D19 |
|---|---|
No | REPAIR the circuit. |
D19 CHECK THE HORIZONTAL MOTOR CIRCUIT FOR AN OPEN BETWEEN THE RH (RIGHT-HAND) EXTERIOR MIRROR AND THE PDM (PASSENGER DOOR MODULE)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.