D14 CHECK THE PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS) WITH THE HORIZONTAL POSITION SENSOR FEEDBACK CIRCUIT SHORTED TO GROUND
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|---|---|
C626-10 | C626-12 |
Ignition ON. Using a diagnostic scan tool, clear the PDM Diagnostic Trouble Codes (DTCs). Perform the PDM self-test.
Is DTC B1C16:11 present?
Yes | REMOVE the jumper wire. GO to D15 |
|---|---|
No | REMOVE the jumper wire. GO to D24 |
D15 CHECK THE PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS) WITH THE VERTICAL POSITION SENSOR FEEDBACK CIRCUIT SHORTED TO GROUND
Ignition OFF. Connect:
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|---|---|
C626-8 | C626-12 |
Ignition ON. Using a diagnostic scan tool, clear the PDM Diagnostic Trouble Codes (DTCs). Perform the PDM self-test.
Is DTC B1C15:11 present?
Yes | REMOVE the jumper wire. GO to D25 |
|---|---|
No | REMOVE the jumper wire. GO to D24 |
D16 CHECK FOR VOLTAGE TO THE HORIZONTAL MOTOR CIRCUIT AT THE RH (RIGHT-HAND) EXTERIOR MIRROR
Ignition OFF. Disconnect: RH Exterior Mirror C626. Connect:
Click to display connectors
Lead 1 | Measurement / Action | Lead 2 |
|---|---|---|
C626-10 | Ground |
Ignition ON.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.