NOTE: The intake camshaft rear bearing cap must be secured within 10 minutes of gasket maker application. If the bearing cap is not secured within 10 minutes, the gasket maker must be removed.
17. Apply 1 mm (0.039 in) beads of gasket maker to the intake rear camshaft bearing cap mating surface as shown in illustration.
Material
: Gasket Maker / TA-16 (WSK-M2G348-A5)
NOTE: Wipe off any excess gasket maker from the vacuum pump sealing surface
Ford_Mustang_all_2015-2017.pdf · source reference 4610
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.