Materials
Name | Specification |
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (U.S.) XO-5W30-QSP (U.S.) | WSS-M2C946-A |
Motorcraft® Silicone Gasket Remover ZC-30-A | - |
Motorcraft® Metal Surface Prep ZC-31-B | - |
Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.) | - |
REMOVAL AND INSTALLATION > CRANKSHAFT REAR SEAL > REMOVAL
1. Remove the flexplate or flywheel. Refer to: Flexplate . Refer to: Flywheel .
2. Remove the bolts and the crankshaft rear seal, discard the crankshaft rear seal.
NOTE: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges, which make leak paths. Use a plastic scraping tool to remove traces of sealant.
3. Clean and inspect the oil pan and cylinder block mating surfaces. Refer to: RTV Sealing Surface
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.