Name | Specification |
Thread Sealant with PTFETA-24-B | WSK-M2G350-A2 |
REMOVAL AND INSTALLATION > OIL PRESSURE SWITCH > REMOVAL
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
NOTE: Vehicles are equipped with either an underbody shield or a subframe bracket and underbody shield assembly.
2.
1. Loosen the 2 front bolts, remove the remaining bolts and the underbody shield.
Torque:
A: 97 lb.in (11 Nm)
B: 18 lb.in (2 Nm)
2. Loosen the 2 front bolts, remove the remaining bolts and the subframe bracket and underbody shield assembly.
Torque:
C: 46 lb.ft (63 Nm)
D: 18 lb.in (2 Nm)
3. Disconnect oil pressure switch electrical connector.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.