Fuel Tank Draining — Fuel System - General Information - 3.7L Duratec (227kW & 301PS) · Reference 6131

6. Connect the battery ground cable. Refer to: Battery Disconnect and Connect .

NOTE: Carry out a Key ON Engine OFF (KOEO) visual inspection for fuel leaks prior to completing the fuel system pressure test.

7. Test the fuel system pressure to make sure it is within the specified range. For additional information, refer to SPECIFICATIONS .

8. After completion of the fuel system pressure test, disconnect the battery ground cable, open the drain valve on the Fuel Pressure Test Kit and release any residual fluid into an appropriate container. Refer to: Battery Disconnect and Connect .

9. Remove the Fuel Pressure Test Kit by reversing the installation steps.

GENERAL PROCEDURES > FUEL TANK DRAINING

Special Tool(s) / General Equipment

Fuel Tank Draining — original illustration 1, reference 6131Original colors & callouts · Select to enlarge	292-00004 Fuel Tanker 100 GPM
Fuel Tank Draining — original illustration 2, reference 6131Original colors & callouts · Select to enlarge	310-123 Locking Ring, Fuel Tank TKIT-2004J-F TKIT-2005U-LM

Draining

1. Release the fuel system pressure. Refer to: Fuel System Pressure Release .

2. Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect .

Ford_Mustang_all_2015-2017.pdf · source reference 6131

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.