Main Control Valve Body — Removal — Automatic Transmission - 6-Speed Automatic Transmission - 6R80 · Reference 8940

REMOVAL AND INSTALLATION > TRANSMISSION SUPPORT INSULATOR >

INSTALLATION

1. To install, reverse the removal procedure.

REMOVAL AND INSTALLATION > MAIN CONTROL VALVE BODY

Special Tool(s) / General Equipment

Main Control Valve Body — original illustration 1, reference 8940Original colors & callouts · Select to enlarge

307-717 Remover, Kostal Sleeve TKIT-2013B-FL TKIT-2013B-ROW

REMOVAL AND INSTALLATION > MAIN CONTROL VALVE BODY > REMOVAL

NOTE: The Solenoid Body Strategy Data Download procedure must be performed if a new main control assembly is installed.

1. Remove the transmission fluid pan and filter. Refer to: Transmission Fluid Pan, Gasket and Filter .

NOTE: Do not pull on the wiring harness to disconnect the electrical connector or damage to the electrical connector will occur.

1. Rotate the transmission electrical connector counterclockwise.

2. Pull the transmission electrical connector out to disconnect.

Ford_Mustang_all_2015-2017.pdf · source reference 8940

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.