Output Shaft Seal — Removal — Automatic Transmission - 6-Speed Automatic Transmission - 6R80 · Reference 8948

case.

12. If a new main control was installed, download a new transmission strategy. Refer to: Transmission Strategy Download .

REMOVAL AND INSTALLATION > OUTPUT SHAFT SEAL

Special Tool(s) / General Equipment

Output Shaft Seal — original illustration 1, reference 8948Original colors & callouts · Select to enlarge

205-199 (T83T-3132-A1) Installer, Spindle/Axle Shaft T83-4000-AT KIT-1983-F TKIT-1983-FLM TKIT-1983-FX

Output Shaft Seal — original illustration 2, reference 8948Original colors & callouts · Select to enlarge

307-715Installer, Output Seal (4X2) TKIT-2013B-FL TKIT-2013B-ROW

Punch

REMOVAL AND INSTALLATION > OUTPUT SHAFT SEAL > REMOVAL

1. Remove the driveshaft. Refer to: Driveshaft .

NOTE: The output shaft flange retaining nut has been staked to prevent it from coming loose. Prior to removing the nut, remove the stake to prevent damage to the output shaft.

2. Remove the stakes from the output shaft flange retaining nut. Use the General Equipment: Punch

Ford_Mustang_all_2015-2017.pdf · source reference 8948

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.