MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Body & Paint

Front Seat Backrest Blower Motor

501-10A Front Seats

2016 MustangReference 1,122 / 6,619HTML edition
← Chapter contentsProcedure contents

501-10A Front Seats 2016 Mustang

Removal and Installation Procedure revision date: 10/22/2015

Front Seat Backrest Blower Motor

Removal

NOTE: LHD driver seat shown, all others similar.

1. Remove the front seat. Refer to: Front Seat (501-10A Front Seats, Removal and Installation).

2. Position the front seat backrest cover.

1. Release the wire harness electrical connector retainers.

2. Detach the front seat backrest cover straps.

3. Position the front seat backrest cover aside.

Front Seat Backrest Blower Motor — original illustration 1, reference 1122Original colors & callouts · Select to enlarge

3. Remove the backrest cover insert.

1. Release the pin-type retainers.

2. Position the backrest cover upward.

Source reference 1122

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.