Crankshaft Rear Seal with Retainer Plate

303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS) 2016 Mustang

Removal and Installation Procedure revision date: 02/10/2015

Base Part Number: 6K301

Special Tool(s) / General Equipment

Crankshaft Rear Seal with Retainer Plate — original illustration 1, reference 172Original colors & callouts · Select to enlarge	100-001 (T50T-100-A) Slide Hammer
Crankshaft Rear Seal with Retainer Plate — original illustration 2, reference 172Original colors & callouts · Select to enlarge	205-153 (T80T-4000-W) Handle
Crankshaft Rear Seal with Retainer Plate — original illustration 3, reference 172Original colors & callouts · Select to enlarge	303-1250 Seal Installer, Rear Main TKIT-2006UFFLM
Crankshaft Rear Seal with Retainer Plate — original illustration 4, reference 172Original colors & callouts · Select to enlarge	303-519 (T95P-6701-EH) Remover, Crankshaft Rear Oil Seal TKIT-1995-FH/FLMH TKIT-1995-LMH/MH
Plastic Scraper

Materials

Name	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.)	WSS-M2C945-A
Motorcraft® Silicone Gasket Remover ZC-30-A	-
Motorcraft® Metal Surface Prep ZC-31-B	-
Silicone Gasket and Sealant TA-30	WSE-M4G323-A4
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.)	-

Removal

1. Remove the flexplate or flywheel. Refer to: Flexplate (303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation). Refer to: Flywheel (303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

Source reference 172

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.