Rear Floor Panel
Special Tool(s) / General Equipment
Resistance Spotwelding Equipment
Scraper for Straight Edges
Hot Air Gun
Knife
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name | Specification |
|---|---|
Metal Bonding Adhesive TA-1, 3M™ 08115, Fusor® 108B | - |
Seam Sealer TA-2-B | - |
Fusor® Flexible Foam Repair 3M™ 08463, Fusor® 121 | - |
Removal
1. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
2. Position the carpeting and the wiring harness away from the working area.
3. Remove the following items:
1. As equipped Refer to: Evaporative Emission Canister (303-13A Evaporative Emissions - 2.3L EcoBoost (231kW/314PS), Removal and Installation). Refer to: Evaporative Emission Canister (303-13B Evaporative Emissions - 3.7L Duratec (227kW/301PS), Removal and Installation). Refer to: Evaporative Emission Canister (303-13C Evaporative Emissions - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).
2. As equipped Refer to: Fuel Tank (310-01A Fuel Tank and Lines - 2.3L EcoBoost (231kW/314PS), Removal and Installation). Refer to: Fuel Tank (310-01B Fuel Tank and Lines - 3.7L Duratec (227kW/301PS), Removal and Installation). Refer to: Fuel Tank (310-01C Fuel Tank and Lines - 5.0L 32V Ti-VCT, Removal and Installation).
3. Refer to: Rear Subframe (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation).
4. As equipped Refer to: Muffler and Tailpipe (309-00A Exhaust System - 2.3L EcoBoost (231kW/314PS), Removal and Installation). Refer to: Muffler and Tailpipe (309-00B Exhaust System - 3.7L Duratec (227kW/301PS), Removal and Installation). Refer to: Muffler and Tailpipe (309-00C Exhaust System - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.