Exhaust Manifold RH — 2016 workshop reference 252

Exhaust Manifold RH — original illustration 1, reference 252Original colors & callouts · Select to enlarge

15. NOTICE: Do not position the legs of the Engine Support Bar on the fenders. Instead, the legs

should be positioned on the body structure. Failure to follow these instructions may result in body damage.

Install the special tools and raise the engine 50 mm (2 inch). Use Special Service Tool: 303-F072 Support Bar, Engine. , 303-050 (T70P-6000) Lifting Bracket, Engine.

Exhaust Manifold RH — original illustration 2, reference 252Original colors & callouts · Select to enlarge

16. Remove the following items:

1. Refer to: Catalytic Converter RH (309-00C Exhaust System - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

2. Refer to: Starter Motor (303-06C Starting System - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

6-Speed Automatic Transmission - 6R80

17. Disconnect the HO2S electrical connector.

Source reference 252

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.