Driveshaft — 2016 workshop reference 2658

Driveshaft — original illustration 1, reference 2658Original colors & callouts · Select to enlarge

6. NOTICE: Make sure the drive shaft is fully seated in the rear pinion before starting bolts.

Install the new driveshaft-to-pinion flange bolts in a star pattern. Torque : 41 lb.ft (55 Nm)

Driveshaft — original illustration 2, reference 2658Original colors & callouts · Select to enlarge

7. Install the muffler and tailpipe. Refer to: Muffler and Tailpipe (309-00A Exhaust System - 2.3L EcoBoost (231kW/314PS), Removal and Installation). Refer to: Muffler and Tailpipe (309-00B Exhaust System - 3.7L Duratec (227kW/301PS), Removal and Installation). Refer to: Muffler and Tailpipe (309-00C Exhaust System - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation). Refer to: Muffler and Tailpipe (309-00D Exhaust System - 5.2L 32V Ti-VCT, Removal and Installation).

Source reference 2658

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.