Component Bleeding

206-00 Brake System - General Information 2016 Mustang

General Procedures Procedure revision date: 07/28/2015

Special Tool(s) / General Equipment

Master Cylinder Bleeding Set

Bleeding

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

Master Cylinder

NOTE: When a new brake master cylinder has been installed, it should be primed to prevent air from entering the system.

1. NOTE: Make sure the area around the master cylinder cap is clean and free of foriegn material.

Remove the brake fluid reservoir cap.

Component Bleeding — original illustration 1, reference 2796Original colors & callouts · Select to enlarge

2. Fill the reservoir with clean, specified brake fluid. Refer to: Specifications (206-00 Brake System - General Information, Specifications).

Source reference 2796

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.