MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Engine

Intake Manifold

303-01C Engine - 5.0L

2016 Mustang5.0LReference 287 / 6,619HTML edition
← Chapter contentsProcedure contents
Intake Manifold — original illustration 1, reference 287Original colors & callouts · Select to enlarge

15. Install the following items:

1. Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation).

2. Refer to: Air Cleaner Outlet Pipe (303-12C Intake Air Distribution and Filtering - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

16. NOTE: The engine appearance cover rubber grommets may remain on the cover. If so, remove the grommets from the cover and install them on the intake manifold before installing the cover.

Install the engine appearance cover.

Intake Manifold — original illustration 2, reference 287Original colors & callouts · Select to enlarge

17. If equipped, install the strut tower cross brace and nuts.

Torque : 41 lb.ft (55 Nm) Attach the wiring harness retainer.

Source reference 287

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.