33. NOTE: Note the position of each synchronizer ring component before removal.
Remove the 1st/2nd synchronizer hub, the 2nd gear synchronizer ring assembly and the 2nd gear.
Inspect all the components for wear or damage. Install new components as necessary.
34. Remove the 2nd gear needle bearing.
Inspect the 2nd gear needle bearing for wear or damage. Install a new needle bearing as necessary.
Source reference 3093
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.