Fuel Tank
Base Part Number: 9002
Special Tool(s) / General Equipment
310-123 Locking Ring, Fuel Tank TKIT-2004J-F TKIT-2005U-LM | |
Flat Headed Screw Driver | |
Materials
Name | Specification |
|---|---|
Threadlock and Sealer TA-25-B | - |
Removal
NOTE: Removal steps in this procedure may contain installation steps.
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation).
2. Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
3. Drain the fuel tank. Refer to: Fuel Tank Draining (310-00C Fuel System - General Information - 5.0L 32V Ti-VCT/5.0L Ti-VCT
V8 (308kW/418PS), General Procedures).
4. Remove the muffler and tailpipe. Refer to: Muffler and Tailpipe (309-00C Exhaust System - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).
5. Index mark the driveshaft and pinion flange for reference during installation. Remove the driveshaft to pinion flange bolts.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.