Is the audio system USB output OK with the MIT 105-00120 connected to the remote USB port/cable?
Yes | The system is operating correctly at this time. The concern was caused by an inoperative remote USB port/cable. |
|---|---|
No | INSTALL a new USB hub. REFER to: Universal Serial Bus (USB) Hub (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation). |
Y6 CHECK THE USB (UNIVERSAL SERIAL BUS) HUB VOLTAGE SUPPLY CIRCUIT
Ignition OFF. Disconnect: USB Hub C3618. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3618-1 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to Y7 |
|---|---|
No | GO to Y8 |
Y7 CHECK THE USB (UNIVERSAL SERIAL BUS) HUB GROUND CIRCUIT
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3618-1 | C3618-4 |
Is the voltage greater than 11 volts?
Yes | INSTALL a new USB hub. REFER to: Universal Serial Bus (USB) Hub (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, Removal and Installation). |
|---|---|
No | GO to Y8 |
Y8 CHECK THE USB (UNIVERSAL SERIAL BUS) HUB VOLTAGE SUPPLY CIRCUIT AND GROUND CIRCUIT FOR AN OPEN
Ignition OFF. Disconnect: APIM C2383. Measure:
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.