Cylinder Head

303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS) 2016 Mustang

Disassembly and Assembly of Subassemblies Procedure revision date: 07/7/2015

Base Part Number: 6051

Special Tool(s) / General Equipment

Cylinder Head — original illustration 1, reference 462Original colors & callouts · Select to enlarge	303-1249 Valve Spring Compressor TKIT-2006UF-FLM TKIT-2006UF-ROW
Cylinder Head — original illustration 2, reference 462Original colors & callouts · Select to enlarge	303-1418 Compressor, Valve Spring TKIT-2008ET-FLM TKIT-2008ET-ROW
Cylinder Head — original illustration 3, reference 462Original colors & callouts · Select to enlarge	303-300 (T87C-6565-A) Set, Valve Spring Compressor T88C-1000-ST TKIT-1988-FESTIVA TKIT-1988-TRACER TKIT-2009TC-F
Cylinder Head — original illustration 4, reference 462Original colors & callouts · Select to enlarge	303-350 (T89P-6565-A) Compressor, Valve Spring TKIT-1989-F TKIT-1989-FLM TKIT-1989-FM TKIT-1990-LMH

Materials

Name	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.)	WSS-M2C945-A
Motorcraft® Orange Antifreeze/Coolant Concentrated (U.S.) VC-3-B (U.S.)	WSS-M97B44-D

DISASSEMBLY

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.

NOTE: If the components are to be reinstalled, they must be installed in their original locations. Mark the components for installation into their original locations.

LH cylinder heads

1. Remove the bolts and the coolant outlet. Discard the gasket.

Source reference 462

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.