99. Install the RH valve cover and tighten the bolts. Torque : 89 lb.in (10 Nm)
100. NOTE: When installing ignition coils, apply a small amount of silicone brake caliper grease and dielectric compound to the inside of the ignition coil boots before installation.
Install the ignition coils and the bolts. Install the ignition coils and the bolts. Material : Silicone Brake Caliper Grease and Dielectric Compound / XG-3-A (ESE-M1C171-A) Torque : Stage 1: 62 lb.in (7 Nm) Stage 2: 50°
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.