MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE
Saved 0

2016 workshop · Engine

Engine

303-01C Engine - 5.0L

2016 Mustang5.0LReference 567 / 6,619HTML edition
← Chapter contentsProcedure contents

46. Install the battery heat shield and fasteners. Torque : 80 lb.in (9 Nm)

Engine — original illustration 1, reference 567Original colors & callouts · Select to enlarge

47. Install the cowl extension and fasteners. Torque : 26 lb.ft (35 Nm)

Engine — original illustration 2, reference 567Original colors & callouts · Select to enlarge

48. Install the following items:

1. Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation).

2. Refer to: Battery Tray (414-01 Battery, Mounting and Cables, Removal and Installation).

3. Refer to: Air Conditioning (A/C) Compressor Belt (303-05C Accessory Drive - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

4. Refer to: Cooling Fan Motor and Shroud (303-03C Engine Cooling - 5.0L 32V Ti-VCT/5.0L Ti-VCT

V8 (308kW/418PS), Removal and Installation).

5. Refer to: Degas Bottle (303-03C Engine Cooling - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).

49. Install the radiator top shield and the retainers.

Source reference 567

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.