303-050 (T70P-6000) Lifting Bracket, Engine | |
303-F072 Support Bar, Engine | |
Plastic Scraper | |
Oil Drain Equipment | |
Vehicle/Axle Stands | |
Round-Ended Steel Rule | |
Materials
Name | Specification |
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor Oil (U.S.) XO-5W30-QSP (U.S.) | WSS-M2C946-A |
Motorcraft® Silicone Gasket Remover ZC-30-A | - |
Motorcraft® Metal Surface Prep ZC-31-B | - |
Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.) | - |
REMOVAL AND INSTALLATION > OIL PUMP > REMOVAL
6-Speed Automatic Transmission - 6R80/6-Speed Manual Transmission - MT82
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
NOTE: Make sure to minimize damage to sealer foam and avoid pulling apart dash seal brackets from retainer pins. Excessive damage may allow engine noise, fumes, air or water to enter the passenger compartment.
2.
1. Remove the steering column dash seal nuts.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.