Valve Cover — Removal — Engine - 2.3L EcoBoost (231kW & 314PS) · Reference 4760

Install the high-Pressure fuel pump drive unit. Refer to: HIGH-PRESSURE FUEL PUMP DRIVE UNIT - 2.3L EcoBoost (231kW/314PS).

REMOVAL AND INSTALLATION > VALVE COVER

Special Tool(s) / General Equipment

Valve Cover — original illustration 1, reference 4760Original colors & callouts · Select to enlarge

205-153 (T80T-4000-W) Handle

Valve Cover — original illustration 2, reference 4760Original colors & callouts · Select to enlarge

303-1247VCT Spark Plug Tube Seal Remover and Installer TKIT-2006UF-FLM TKIT-2006UF-ROW

Materials

Name	Specification
Silicone Gasket and Sealant TA-30	WSE-M4G323-A4

REMOVAL AND INSTALLATION > VALVE COVER > REMOVAL

NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.

1. Remove the nuts and the engine appearance cover.

Ford_Mustang_all_2015-2017.pdf · source reference 4760

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.