Engine Front Cover — Removal — Engine - 3.7L Duratec (227kW & 301PS) · Reference 5061

Engine Front Cover — original illustration 1, reference 5061Original colors & callouts · Select to enlarge	205-150 (T80T-4000-S) Installer, Spindle Bearing
Engine Front Cover — original illustration 2, reference 5061Original colors & callouts · Select to enlarge	205-153 (T80T-4000-W) Handle
Engine Front Cover — original illustration 3, reference 5061Original colors & callouts · Select to enlarge	307-399 Alignment Pins, Transmission Fluid Pump TKIT-2000AP-FLM/LM TKIT-2002N-DEW
Plastic Scraper
Oil Drain Equipment

Materials

Name	Specification
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.)	WSS-M2C945-A
Motorcraft® High Performance Engine RTV Silicone TA-357	WSE-M4G323-A6
Motorcraft® Silicone Gasket Remover ZC-30-A	-
Motorcraft® Metal Surface Prep ZC-31-B	-
Metal Brake Parts Cleaner (U.S.) PM-4-A, PM-4-B (U.S.)	-

REMOVAL AND INSTALLATION > ENGINE FRONT COVER > REMOVAL

NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

NOTE: Vehicles are equipped with either an underbody shield or a subframe

Ford_Mustang_all_2015-2017.pdf · source reference 5061

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.