Fuel Pump And Sender Unit — Removal — Fuel Tank And Lines - 2.3L EcoBoost (231kW & 314PS) · Reference 6187

REMOVAL AND INSTALLATION > FUEL LINES > INSTALLATION

1. To install, reverse the removal procedure.

REMOVAL AND INSTALLATION > FUEL PUMP AND SENDER UNIT

Special Tool(s) / General Equipment

	292-00004 Fuel Tanker 100 GPM
Fuel Pump And Sender Unit — original illustration 2, reference 6187Original colors & callouts · Select to enlarge	310-123 Locking Ring, Fuel Tank TKIT-2004J-F TKIT-2005U-LM

Fuel Pump And Sender Unit — original illustration 1, reference 6187Original colors & callouts · Select to enlarge

REMOVAL AND INSTALLATION > FUEL PUMP AND SENDER UNIT > REMOVAL

1. Release the fuel system pressure. Refer to: FUEL SYSTEM PRESSURE RELEASE - 2.3L EcoBoost (231kW/314PS).

2. Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect .

NOTE: The supplemental refueling adapter is located in the luggage compartment.

3. Install the supplemental refueling adapter and a 6 ft. length of 5/8 in. semi-rigid fuel drain tube into the Easy Fuel™ (capless) fuel tank filler pipe until the tube enters the fuel tank.

Ford_Mustang_all_2015-2017.pdf · source reference 6187

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.