B-Pillar and Reinforcement - Coupe — 2016 workshop reference 2303

B-Pillar and Reinforcement - Coupe — original illustration 1, reference 2303Original colors & callouts · Select to enlarge

9. Metal finish the repair area using typical metal finishing techniques.

10. Sealing work: All areas must be sealed to production level. Material : Seam Sealer / TA-2-B

11. Restore the corrosion protection. Refer to: Corrosion Prevention (501-25 Body Repairs - General Information, General Procedures).

12. Reposition the carpet and wiring harness.

13. Install the following items:

1. Refer to: Roof Panel (501-28 Roof Sheet Metal Repairs, Removal and Installation).

2. Refer to: Quarter Panel - Coupe (501-30 Rear End Sheet Metal Repairs, Removal and Installation).

3. Refer to: Rear Seat Cushion (501-10B Rear Seats, Removal and Installation).

Source reference 2303

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.