Quarter Panel - Coupe
Special Tool(s) / General Equipment
Resistance Spotwelding Equipment
Hot Air Gun
Air Body Saw
8 mm Drill Bit
MIG/MAG Welding Equipment
Spot Weld Drill Bit
Locking Pliers
Materials
Name | Specification |
|---|---|
Metal Bonding Adhesive TA-1, 3M™ 08115, Fusor® 108B | - |
Seam Sealer TA-2-B | - |
Fusor® Flexible Foam Repair 3M™ 08463, Fusor® 121 | - |
Removal
1. If required, dimensionally restore vehicle to pre-accident condition. Refer to: Body and Frame (501-26 Body Repairs - Vehicle Specific Information and Tolerance Checks, Description and Operation).
2. Remove the following items:
1. Refer to: Roof Panel (501-28 Roof Sheet Metal Repairs, Removal and Installation).
2. Refer to: Front Door (501-03 Body Closures, Removal and Installation).
3. Refer to: Luggage Compartment Lid (501-03 Body Closures, Removal and Installation).
4. LH side Refer to: Fuel Filler Door Assembly (501-03 Body Closures, Removal and Installation).
5. LH side as equipped. Refer to: Fuel Tank Filler Pipe (310-01A Fuel Tank and Lines - 2.3L EcoBoost (231kW/314PS), Removal and Installation). Refer to: Fuel Tank Filler Pipe (310-01B Fuel Tank and Lines - 3.7L Duratec (227kW/301PS), Removal and Installation). Refer to: Fuel Tank Filler Pipe (310-01C Fuel Tank and Lines - 5.0L 32V Ti-VCT, Removal and Installation).
6. Refer to: Rocker Panel Moulding (501-08 Exterior Trim and Ornamentation, Removal and Installation).
7. Refer to: Fixed Glass (501-11 Glass, Frames and Mechanisms, General Procedures).
8. Refer to: Loadspace Trim Panel - Coupe (501-05 Interior Trim and Ornamentation, Removal and Installation).
9. Refer to: Rear Quarter Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
10. Refer to: Rear Bumper (501-19 Bumpers, Removal and Installation).
11. Refer to: Rear Lamp Assembly (417-01 Exterior Lighting, Removal and Installation).
3. Remove the door striker from the affected side.
4. Position aside the carpet and wiring harness.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.