Upper Intake Manifold — Removal — Engine - 3.7L Duratec (227kW & 301PS) · Reference 5204

Upper Intake Manifold — original illustration 1, reference 5204Original colors & callouts · Select to enlarge

12. Install the engine front cover. Refer to: Engine Front Cover .

REMOVAL AND INSTALLATION > UPPER INTAKE MANIFOLD

Special Tool(s) / General Equipment

Hose Clamp Remover/Installer

REMOVAL AND INSTALLATION > UPPER INTAKE MANIFOLD > REMOVAL

NOTE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in engine damage.

1. Remove the air cleaner outlet pipe. Refer to: AIR CLEANER OUTLET PIPE .

1. Disconnect the vacuum hose from the upper intake manifold.

Use the General Equipment: Hose Clamp Remover/Installer

2. Detach the vacuum hose retainer from the throttle body.

Ford_Mustang_all_2015-2017.pdf · source reference 5204

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.