10. Install the flexplate or flywheel. Refer to: Flexplate . Refer to: Flywheel .
REMOVAL AND INSTALLATION > CYLINDER HEAD LH
Special Tool(s) / General Equipment
Oil Drain Equipment
Materials
Name | Specification |
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil (U.S.) XO-5W20-QSP (U.S.) | WSS-M2C945-A |
REMOVAL AND INSTALLATION > CYLINDER HEAD LH > REMOVAL
NOTE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
NOTE: If the cylinder head is replaced, a new secondary timing chain tensioner will need to be installed. Refer to Variable Camshaft Timing (VCT) Unit .
1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
2. Release the fuel system pressure. Refer to: FUEL SYSTEM PRESSURE RELEASE .
3. Disconnect the battery ground. Refer to: Battery Disconnect and Connect .
4. Disconnect the LH HO2S and catalyst monitor sensor electrical connectors.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.